JVC RX-7012RSL - Manual (Page 36)

33
CD changer
After pressing CONTROL repeatedly until “CDDSC” appears on
the display window, you can perform the following operations on
the CD changer:
PLAY 3: Starts playing.
4 4 4 4 4: Returns to the beginning of the current (or previous)
track.
¢ ¢ ¢ ¢ ¢:
Skips to the beginning of the next track.
STOP 7: Stops playing.
PAUSE 8: Pauses playing. To release it, press PLAY 3.
1 – 6, 7/P : Selects the number of a disc installed in a CD
changer.
After pressing CD, you can perform the following operations on the
CD changer:
1 – 10, +10 : Selects a track number directly.
For track number 5, press 5.
For track number 15, press +10, then 5.
For track number 20, press +10, then 10.
For track number 30, press +10, +10, then 10.
EXAMPLE:
• Selecting disc number 4, track number 12, and starting playback.
1. Press CONTROL repeatedly until “CDDSC” appears on the
display window, then press 4.
2. Press CD, then press +10, 2.
Turntable
After pressing PHONO, you can perform the following operations
on a turntable:
PLAY 3:
Starts playing.
STOP 7: Stops operations.
Cassette deck
After pressing TAPE/CDR (or CONTROL repeatedly until “TAPE”
appears on the display window), you can perform the following
operations on a cassette deck:
PLAY 3: Starts playing.
REW : Fast winds the tape from right to left.
FF : Fast winds the tape from left to right.
STOP 7: Stops operations.
PAUSE 8: Pauses playing. To release it, press PLAY 3.
REC PAUSE : Starts recording or enters recording pause.
CD recorder
After pressing TAPE/CDR (or CONTROL repeatedly until “TAPE”
appears on the display window), you can perform the following
operations on the CD recorder:
PLAY 3: Starts playing.
4 4 4 4 4: Returns to the beginning of the current (or previous)
track.
¢ ¢ ¢ ¢ ¢:
Skips to the beginning of the next track.
STOP 7: Stops playing.
PAUSE 8: Pauses playing. To release it, press PLAY 3.
REC PAUSE : Starts recording or enters recording pause.
Note:
You can use either TAPE/CDR button or CONTROL button to activate
the buttons listed above. If you press TAPE/CDR, the playing source
also changes. On the other hand, if you press CONTROL repeatedly
to select “TAPE,” the playing source does not change.
EN31_40.RX-7010&7012R[B]_f 01.1.9, 5:25 PM 33