JVC BR-DV3000 - Manual (Page 27)

E-27
Switching on the power
Mini
PROFESSIONAL
REC PLAY
REW STO
DVCAM NTSC PAL REC INH.
CH-1/3
CH-2/4
BR-DV3000
A.DUB
OPERATE
INPUT SEL. REMOTE SEL. MIC
SERIAL
WIRELESS 9PIN
LINE
DV Y/C
OPERATE indicator
OPERATE button
DISPLAY
BARS
MENU SEARCH+
SEARCH–
A.DUB
F.REV
INDEX– INDEX+
PLAY
STOP
REMOTE CONTROL UNIT
RM-G3000
REW FF
PAUSE
SET
BLANK
STILL
MODE
AUDIO
MUTING
OUT SEL.
OUT LEV.
REC
F.ADV
Turning off the power
Ⅵ Stop all operational activities of the unit.
1.
Press the OPERATE button on the unit or the remote controller.
• The unit will enter the OPERATE OFF mode and the OPERATE indicator will light up red.
2.
If the unit is not to be used for a long period of time, please unplug the AC adapter.
• To disconnect the AC adapter, please unplug the power cord from the socket first.
Ⅵ When the unit is in the OPERATE OFF
mode (the OPERATE indicator lights
up red), press the OPERATE button on
the unit or the remote controller.
• The power is turned on and the OPERATE in-
dicator lights up green. The unit is now ready
for operation. (OPERATE ON mode)
Memo
• Once a cassette has been loaded in the OP-
ERATE OFF mode, power will be turned on
and the OPERATE ON mode will be engaged.
• The remote controller is only effective when
the REMOTE SEL. switch is set to “WIRE-
LESS”.
Note
• After pressing the OPERATE button and turn-
ing on the power, if the LED blinks in green or
the “UNPLUG MAIN POWER, PLUG BACK
IN AFTER A WHILE” is displayed on the moni-
tor, please unplug the power cord from the
outlet and then wait for some time before plug-
ging it in again.