JVC HR-J655EK - Manual (Page 34)

34
SUBSIDIARY SETTINGS (cont.)
Storing Channels Manually
To store channels that were not stored during Auto Set Up (
੬
pg.
6) or Auto Channel Set (
੬
pg. 32).
ACCESS MAIN MENU
1
Press MENU.
ACCESS CONFIRMATION
SCREEN
2
Press
%fi to move the highlight bar (pointer) to
“MANUAL CH SET”, then press OK or . The Confir-
mation screen appears.
SELECT POSITION
3
Press
%fi until an
open position in which
you want to store a
channel begins blinking,
then press OK. The
Manual Channel Set
screen appears.
INPUT CHANNEL
4
Press the NUMBER keys to
input the channel number
you want to store.
● To input the registered
station name (ID –
੬
pg.
37), press until "– – –␣ –"
(ID setting) begins
blinking, then
press
%fi.
● For fine tuning
adjustment, press
until "+/–" begins
blinking, then
press
%fi.
While tuning, “+” or “–” appears.
ENTER NEW CHANNEL
INFORMATION
5
Press OK and the Confirmation screen appears.
● Repeat steps 3 through 5 as necessary.
CLOSE CONFIRMATION SCREEN
6
Press MENU.
● To change positions, see "Change Station Preset
Position" (
੬
pg. 35).
● If you wish to set station names other than the ones
registered in your recorder,
੬
"Set Stations (B)" on
page 36.
%
ATTENTION
After you have stored channels manually, be sure to
perform Guide Program Number Set (
੬
pg. 40) in order to
get proper results from Video Plus+ timer recording.
%
%
1 2 3
4 5 6
7 8 9
0
2
4
1
3
?
NUMBER
(Ex.) To store in position 6.
The blueback screen and the
programme currently being
broadcast by the selected channel
appear alternately for 8 seconds
each.
The blueback screen and the
programme currently being
broadcast by the selected channel
appear alternately for 8 seconds
each.
%%
5
5
PR CH ID PR CH ID
01 26 BBC1 08 – – – –
02 33 BBC2 09 – – – –
03 23 ITV 10 – – – –
04 30 CH4 11 – – – –
05 37 CH5 12 – – – –
06 – – – – 13 – – – –
07 – – – – 14 – – – –
[ 5∞ ]
= : EDIT
= [X] : DELETE
[MENU] : EXIT
PR CH ID FINE
06 CH21 – – – – +/–
[0–9] : SELECT
[
] : CURSOR +=
: OK
[MENU] : EXIT
∞ ∞
MENU
OK