JVC LCT2440-001B - Manual (Page 28)

4
28
Setting Menu (Continued)
Settings
z
This setting is available only when projecting the HDMI input.
z
When high definition images are input, the screen size is fixed at A16:9B.
z This setting can also be configured from the remote control. (p P12, 22)
z
This setting is available only when projecting the video or S-video input.
z This setting can only be adjusted when NTSC signals are input to the video or S-video input terminal.
Video>HDMI
Q HDMI
Configures the input signals of the HDMI input terminal.
Auto Automatically configures input signals.
YCbCr(4:4:4) Select this when Y Cb Cr (4:4:4) video signals are input.
YCbCr(4:2:2) Select this when Y Cb Cr (4:2:2) video signals are input.
RGB Select this when RGB video signals are input.
Video>Aspect
R Aspect
Configures the screen size (aspect ratio) of the projected image.
4:3 Sets screen size of the projected image to 4:3.
16:9 Sets screen size of the projected image to 16:9.
Zoom Zooms the image.
Video>Film Mode
S Film Mode
Select this to view movies shot on film.
Auto For normal circumstances, select this setting.
Off Select this when you are not watching movies shot on film.
Video>Color System
T Color System
Configures the colour system.
Auto Configures the colour system automatically.
NTSC Select this when the colour system is NTSC.
NTSC4.43 Select this when the colour system is NTSC4.43.
PAL Select this when the colour system is PAL.
PAL-M Select this when the colour system is PAL-M.
PAL-N Select this when the colour system is PAL-N.
SECAM Select this when the colour system is SECAM.
Video>Black Level
U Black Level
Configures the black level.
0 %
Select this when the gradation of the dark portions of an image is indistinct with the
7.5 % setting.
7.5 % Select this when the dark portions of an image appear washed out with the 0 % setting.
DLA-RS1E_EN.book Page 28 Tuesday, February 26, 2008 10:43 AM