Setting menu (continued) – JVC LCT2440-001B User Manual
Page 26
4
26
Setting Menu (Continued)
z
ANormalB is suitable for normal circumstances but AAB, ABB or ACB can be selected according to your preference.
z
This setting can also be configured from the remote control. (p
z
The horizontal and vertical directions are reversed when the image is flipped to the left or right, or flipped up or down.
z
To adjust, use still images with distinct outlines.
z
As the adjustments are minor, the effect may be difficult to see for some images.
z
This setting can also be configured from the remote control. (p
Image>Gamma
H
Gamma
Sets the gradation characteristics of the projected image.
Normal
For normal circumstances, select this setting.
A
Sets gamma to
AAB.
B
Sets gamma to
ABB.
C
Sets gamma to
ACB.
Image>Offset
I
Offset
Adjusts the respective brightness of the red, green and blue colours. (Offset level)
Red
(Less red) b30 to 30 (More red)
Green
(Less green) b30 to 30 (More green)
Blue
(Less blue) b30 to 30 (More blue)
Image>Pixel Adjust
J
Pixel Adjust
Makes fine adjustments of 1 pixel unit for each minor colour shift in the horizontal/vertical direction of the image.
Horiz. Red
(Moves red to left) 1 to 7 (Moves red to right)
Horiz. Green
(Moves green to left) 1 to 7 (Moves green to right)
Horiz. Blue
(Moves blue to left) 1 to 7 (Moves blue to right)
Vert. Red
(Moves red down) 1 to 5 (Moves red up)
Vert. Green
(Moves green down) 1 to 5 (Moves green up)
Vert. Blue
(Moves blue down) 1 to 5 (Moves blue up)
Setup>Image Profile
K
Image Profile
Configures the image profile. (p
Cinema
Select this to view images with movie quality in a dark room.
Natural
Select this to view projected images with quality as-is in a dark room.
Dynamic
Select this to view images with clear quality in a bright room.
User1
Selects image profile registered in
AUser1B.
User2
Selects image profile registered in
AUser2B.
User3
Selects image profile registered in
AUser3B.
DLA-RS1E_EN.book Page 26 Tuesday, February 26, 2008 10:43 AM