JVC LCT2440-001B - Manual (Page 20)

20
3 Basic Operation
Projecting Image
Preparation
z Remove the lens cap.
A
Insert the power plug to the power outlet
B
Turn on the power
C
Project the image
a Select input mode
b Play back the selected device
D
Adjust the position of the projection screen
This section describes the basic operations to project input images on the screen.
z You can also press the [STANDBY/ON] button on the unit to turn on the
power. (p
P11)
z
You can also select the input mode by pressing the [INPUT] button on
the unit. (p
P11)
z See AInstalling the Projector and ScreenB for procedures on adjusting the
position. (p P18)
A
B
Light on (Red)
Power Cord
(Supplied)
A Connect to this unit
B Connect to the power outlet
Light on (Green)
DLA-RS1E_EN.book Page 20 Tuesday, February 26, 2008 10:43 AM