Jensen Phase Linear SD1513 User Manual

Page 7

Text mode
Original mode

SD1513

press the left side of the panel until the panel
locks into place.

Reset Button

The reset button (26) is located on the front of
the chassis and can only be accessed with the
front panel removed. The reset circuitry
protects the microprocessor circuitry. Since
resetting the unit will erase the time and preset
memories, it should only be activated upon
initial installation after all wiring is complete, or
if there is a malfunction of any of the switches
on the unit. In these circumstances, pressing
the reset button will clear the system and return
the unit to normal operation.

RESET