JVC DLA-RS0 - Manual (Page 33)

ENGLISH
Getting Started
Preparation
Basic Operation
Troubleshooting
Settings
Others
>
1023
512
50 100(%)
Exit MENU BACK Back Select Operate
A
B
C
0
2.2
Gamma
Correction Value White Red Green Blue
Copy Paste
Reset
Normal
Costom1 Costom2
Costom3
Picture Adjust
>
1023
512
50 100(%)
Exit MENU BACK Back Back Select Operate
A
B
C
0
2.2
Gamma
Correction Value White Red Green Blue
Copy Paste
Reset
Normal
Costom1 Costom2
Costom3
Picture Adjust
Input: 10% Output:100
>
1023
512
50 100(%)
Exit MENU BACK Back Back Select Operate
A
B
C
0
2.2
Gamma
Correction Value White
Red Green Blue
Copy
Paste
Reset
Normal
Costom1
Costom2
Costom3
Picture Adjust
Input: 50% Output: 580
Select the point where the gradation (brightness)
is to be adjusted with the / buttons.
Adjust the gradation (brightness) with
the / buttons.
BACK BACK OK
Yes No
Save gamma data?
Picture Adjust > Gamma
07 Gamma
Sets the gradation characteristics of the projected image.
Normal
For normal circumstances, select this
setting.
Gamma adjustment cannot be performed,
and only copy is valid.
A Set gamma to “A”.
B Set gamma to “B”.
C Set gamma to “C”.
Custom 1
Custom 2
Custom 3
(Gamma Setup)
Three different kinds of gamma can be set according to your preferences.
Correction
Value
The coefficient (1.8 to 2.6) of the gamma curve can be selected.
Gamma
Adjustment*
The gamma curve for the colors (Red, Green, Blue) can be adjusted
separately.
Adjusting “White” will adjust for all “Red, Green, Blue” values. The
gamma curve displays the value for "Green".
Copy Copy the adjusted gamma data.
Paste Paste the copied gamma data.
Reset
Return the gamma coefficients to the values 2.2 set by “Correction
Value”.
● “Normal” is suitable for normal circumstances but other settings can be selected according to your preferences.
● This setting can also be configured from the remote control. ( P16)
* “Gamma Adjustment”
① Select the reference gamma curve coefficient (1.8 ～ 2.6) in “Correction Value”.
② Select the color to be adjusted in the gamma adjustment screen.
③ Adjust the gamma curve in the gamma curve adjustment screen.
④ To end
● If gamma curve is adjusted repeatedly, calculation errors will be accumulated and the gamma curve may not be able to
revert back to its original form. In that case, select “Reset”.