Jura Capresso IMPRESSA C9 - Manual (Page 22)

• If the machine will not be used for a longer period of time, empty
the water container and remove the CLEARYL filter. Fill a
glass with at least 2 inches of water and immerse the filter.
Place the glass in the refrigerator.
• When you use the machine again, install the filter.
14. PROGRAMMING
The C9 OT provides programming, rinse and look-up functions.
•
READY . Push the Rotary Dial until display shows RINSE .
• Turn the Rotary Dial clockwise to access the following functions:
RINSE . . . . . . .15.1
BUTTONS . . . .14.1 (beverage buttons)
FILTER - or ✓ . .13a
HARDNESS . . .12b If " FILTER ✓ ", this function is suppressed.
ENERGY . . . . . .14.3
TIME . . . . . . . .14.4
UNIT ON . . . . . .14.5
OFF AFTER . . .14.6
INFO . . . . . . . . .14.7
DISPLAY . . . . . .14.8
LANGUAGE . . .14.9
EXIT
Please note: to get back to READY , turn the Rotary Dial until the
display shows EXIT , then push the Rotary Dial.
14.1 RE-PROGRAMMING BEVERAGE BUTTONS ( BUTTONS )
This program allows you to change all parameters for all beverage
functions. The following parameters can be changed:
Coffee volume (
WATER ): for all coffee / cappuccino buttons
from 0.5 to 8 oz.
(Note: for 2-cup brewing the volume will automatically double).
Coffee strength (
STRENGTH ) for all coffee / cappuccino
buttons choose from three settings, MILD , NORMAL , STRONG .
Temperature: for all coffee drinks the temperature can be set to
NORMAL or HIGH .
MILK : steaming can be set from 3 to 120 seconds.
HOT WATER PORTION : can be set from 0.5 to 15 oz.
Example 1:
Re-program the Coffee button to: 4 ounces of coffee, mild,
normal temperature.
READY .
1. Push the Rotary Dial until the display shows RINSE .
2. Turn the Rotary Dial to BUTTONS and push the Rotary Dial.
The display shows SELECT BUTTON .
3. Push the COFFEE button (Fig. 3.5). The display shows
WATER (here this means coffee volume).
4. Push the Rotary Dial 5.0 OZ. and turn the dial until the
display shows 4.0 OZ .
5. Push the Dial to confirm: OK then WATER .
6. Turn the Rotary Dial until the display shows STRENGTH and
push the Dial, NORMAL .
7. Turn the Rotary Dial until the display shows MILD and push
the Dial, OK , then STRENGTH .
8. Turn the Rotary Dial until the display shows TEMP. and push
the Dial, HIGH .
9. Turn the Dial until the display shows NORMAL and push the
Dial to confirm, OK , then TEMP .
10. Turn the Rotary Dial until the display shows EXIT and push
the Rotary Dial. BUTTON .
22.
Chapter