Jura Capresso IMPRESSA C9 - Manual (Page 12)

• Never fill anything but fresh, cold clean water into the water
container, except when decalcifying (chapter 17.1).
• Never use mineral or carbonated water. You can use tap
water, bottled water, spring water, distilled water and reverse
osmosis water.
• Never repair or open the machine yourself. All repairs should
be performed only by an authorized service center.
• Do not place the machine on a surface which is sensitive to
hot or cold water and steam. Never place the machine on an
uneven surface.
5. FACTORY SETTINGS / OPTIONS
The IMPRESSA C9 One Touch can be set up in many different
ways. Beverages, on/off settings, temperature, water treatment
and display information can be programmed to your personal
preferences. Beverage buttons can be customized with regards
to volume (cup size), coffee strength (
STRENGTH ), temperature,
and duration of milk steaming/frothing.
Volume (
WATER ):
• The Coffee buttons can be programmed to brew between 0.5
and 8 oz. of coffee per cup.
Note: pushing the Espresso and Coffee buttons twice within two
seconds brews a “double” cup (up to 16 oz.).
• The Hot Water Button can be programmed to dispense up to
15 oz. of hot water.
Coffee strength ( STRENGTH ):
• All Coffee buttons can be set to three strength settings MILD ,
NORMAL , STRONG . In MILD the conical burrs grind for approx.
5 seconds, in STRONG, the grinding takes about 9 seconds.
When brewing double cups the C9 OT will always grind STRONG.
Temperature:
• All coffee buttons can be set to
NORMAL or HIGH .
• The Hot Water function is set to HIGH.
• Steaming for frothing can be set from 3 to 120 seconds.
Factory Settings for Beverage Buttons:
• All coffee buttons are set to temperature
HIGH .
• Espresso button (Fig. 3.6)1.5 oz./ STRONG .
• Coffee button (Fig. 3.5 ) 5 oz. per cup / NORMAL .
• Cappuccino; one-touch button (Fig. 4) 14 seconds milk,
2 oz. coffee / NORMAL .
• Milk portion button (Fig. 4) 30 seconds milk,
• Water portion button (Fig. 4) 6 oz.;
Other Factory Settings:
• 2-hour auto shut-off.
• Water hardness setting: 10ºdH.
• Filter:
FILTER - (Clearyl Water Care Cartridge: not installed)
• Language: English.
• Display: AM/PM and OZ.
• Energy Save: off
• Time: not set
• Auto on: not set
6. PREPARING THE MACHINE FOR THE FIRST TIME
• Make sure all accessories, literature and any other items are
removed from the bean container and the water tank.
• DO NOT install the Clearyl water filter now (chapter 13a).
• Make sure the machine sits on an even, flat surface and the
drawer and used coffee container are inserted (Fig. 1 and Fig. 2).
• Plug in machine.
12.