John Lewis JLBICM 01 - Manual (Page 18)

16
• Push the machine back into the housing until a „click‰ can be
heard. This indicates that the machine is locked in position.
Stand-by mode
• Once powered and inserted into the cabinet, the machine is in stand-by mode: this will be signaled by the on/off
LED blinking.
• Press the start control to switch on the machine: the start LED will be illuminated.
• To come back to the stand-by mode, press the start control once again.
CAUTION:
On start-up, the machine initiates the pre-warming phase for the firs 3 minutes. During this phase the ON/OFF LED
will blink quickly and the machine will be not able to execute any operation. Then the LED blinks slowly and the
machine is ready to operate.