John Lewis JLBICM 01 - Manual (Page 13)

11
Instructions for the first use
Filling up the water reservoir
• Squeeze together the
unlocking levers found
under the drip tray
• Gently pull the coffee machine
forward from the housing by
sliding it along the telescopic
runners.
Hardness of water:
• Before filling up the water reservoir, make sure that the
decalcifying Brita filter has been soaked in cold water for at least
30 min. Follow the instructions printed on the filter package.
After this operation insert the filter into position inside the water
reservoir as shown in the figure.
• If the machine will not be used for long periods, empty the water
from tank.
• Brita filters are available from most supermarkets and domestic
goods outlets, at our After-Sales Service Centres or at the Shops
of Authorized Spare Parts.