JVC XA-MP102A - Manual (Page 21)

21
To select sound mode
1. After turning on the player, press MENU button and ¢ / 4 button
to select SET mode from Main Menu, and then press 6 button to
enter that mode.
2. Press ¢ / 4 button to select “EQ SET”.
3. Press 6 button.
4. Press ¢ / 4 button to select the sound mode.
5. Press 6 button to return to SET MENU.
To create sound mode (CUST)
1. After turning on the player, press MENU button and ¢ / 4 button
to select SET mode from Main Menu, and then press 6 button to
enter that mode.
2. Press ¢ / 4 button to select “EQ SET”.
3. Press 6 button.
4. Press ¢ / 4 button to select “CUST”.
5. Press MENU button briefly to start editing.
The indicator of the lowest frequency is highlighted.
6. Press ¢ / 4 button to select the frequency you want to edit.
7. Press 6 button.
The indicator starts to blink.
8. Press ¢ / 4 button to set the level up or down and then press
6 button to store it.
9. Repeat Steps 6 through 8 to edit for other frequencies.
10. Press MENU button briefly. The highlight disappears and the setting is
completed.
11. Press 6 button to return to SET MENU.
To exit SET mode:
Press MENU button (or select “EXIT” and press 6 button) in the SET
MENU.
XA-MP52-102(E).book Page 21 Wednesday, October 5, 2005 9:45 AM