JVC LT-42WX70EU User Manual
Page 57
39
Troubleshooting
Cannot turn on the monitor.
●
Connect the power cord properly. (➔ page 10)
●
Turn on the power switch. (➔ page 10)
The remote control does not work.
●
Insert the batteries in the correct direction. (➔ page 05)
●
Replace the batteries with new ones.
●
Aim the remote control to the remote sensor on the monitor. (➔ page
11)
●
The effective range of the remote control is about seven meters.
●
Get closer to the monitor.
●
Remove any obstruction between the remote control and the monitor.
No picture from a connected device.
●
Select the correct input on the monitor.
●
Connect the external device properly.
●
Turn on the external device and start playback.
No sound.
●
Check the speaker cord connection. (➔ page 05)
●
Press the MUTE button ( ).
●
Check the amplifier connection.
●
When “ AMP ” is selected under “ Speaker ”, the sound is output from the
amplifier, and not from the speakers of the monitor. (➔ page 13)
No picture from HDMI devices.
●
Select the correct input on the monitor.
●
Use a cable marked with the HDMI logo.
●
Please use a High Speed HDMI
TM
Cable. High Speed HDMI
TM
Cables are
tested to carry an HD signal up to 1080p and higher. (➔ page 09)