Jacuzzi U961000G - Manual (Page 7)

ENGLISH
Important: Read complete instructions before beginning installation.
Each whirlpool bath arrives ready for installation, completely equipped with motor/pump assembly and plumbing and fittings
necessary for whirlpool operation. An optional drain/overflow kit is available for installation on the bath.
Remove the bath from the carton. Retain the shipping carton until satisfactory inspection of the product has been made. Do
not lift the bath by the plumbing at any time; handle by the shell only.
Immediately upon receipt, inspect the shell before installing. Should inspection reveal any damage or defect in the finish, do
not install the bath. Damage or defect to the finish claimed after the bath is installed is excluded from the warranty. Jacuzzi
Whirlpool Bath's responsibility for shipping damage ceases upon delivery of the products in good order to the carrier. Refer any
claims for damage to the carrier. For definitions of warranty coverage and limitations, refer to the published warranty informa-
tion packed with the product.
All bath units are factory tested for proper operation and watertight connections prior to shipping. NOTE: Prior to installa-
tion, the bath must be filled with water and operated to check for leaks that may have resulted from shipping damage
or mishandling. Jacuzzi Whirlpool Bath is not responsible for any defect that could have been discovered, repaired, or
avoided by following this inspection and testing procedure.
END VIEW
H
W
SIDE VIEW
L
2"
(51 mm)
(Motor)
(Motor)
BATHS WITHOUT INTEGRAL SKIRT, 6036, 6042, 7236, & 7242
L
1"
25.4 mm
H
W
SIDE VIEW
BATHS WITH INTEGRAL SKIRT
END VIEW
SPECIFICATIONS (Rectangular)
MODEL
PRODUCT
WEIGHT
AVERAGE
OPERATING
GALLONAGE
TOTAL WEIGHT/
FLOOR LOADING DIMENSIONS
DRAIN/OVERFLOW
DIMENSIONS
SKIRT &
MOUNTING CUTOUT
HEATER READY
FOR FIELD
INSTALLATION
ESPREE 6032 60" (1524 mm) L
32" ( 813 mm) W
22" ( 559 mm) H
785 lb
(357 kg)/
59 lb/sq. ft.
(288 kg/m 2 )
50 Min U.S. gal
(189 liters)
58 Max U.S. gal
(220 liters)
102 lb
(46 kg)
18-1/16" (459 mm) A
10-1/4" (273 mm) B
Not
Available
*Add 1/4" to this dimension when roughing-in for 3-wall niche.
ESPREE 6036 60" (1524 mm) L
36" ( 914 mm) W
20" ( 508 mm) H
825 lb
(375 kg)/
55 lb/sq. ft.
(268 kg/m 2 )
117 lb
(53 kg)
Not
Available
Yes
(U395000 HEATER KIT)
ESPREE 6032
WITH INTEGRAL
SKIRT
60" (1524 mm) L *
32" ( 813 mm) W
22" ( 559 mm) H
113 lb
(51 kg)
16-7/8" (429 mm) A
10-13/16" (275 mm) B
Integral NA Yes
(S750000 HEATER KIT)
ESPREE 6042 60" (1524 mm) L
42" (1067 mm) W
20" ( 508 mm) H
936 lb
(425 kg)/
67 lb/sq. ft.
(326 kg/m 2 )
127 lb
(58 kg)
Not
Available
Yes
(S750000 HEATER KIT)
ESPREE 7236 72" (1829 mm) L
36" ( 914 mm) W
20" ( 508 mm) H
911 lb
(414 kg)/
51 lb/sq. ft.
(249 kg/m 2 )
120 lb
(55 kg)
Not
Available
Yes
(U395000 HEATER KIT)
ESPREE 6042
WITH INTEGRAL
SKIRT
60" (1524 mm) L *
42" (1067 mm) W
20" ( 508 mm) H
893 lb
(406 kg)/
51 lb/sq. ft.
(249 kg/m 2 )
127 lb
(57 kg)
Integral NA Yes
(S750000 HEATER KIT)
RECTANGULAR BATHS
ESPREE 7242 72" (1829 mm) L
42" (1067 mm) W
20" ( 508 mm) H
886 lb
(403 kg)/
42 lb/sq. ft.
(205 kg/m 2 )
120 lb
(55 kg)
Not
Available
Yes
(U395000 HEATER KIT)
SPECIFICATIONS
16-7/8" (429 mm) A
15-5/8" (397 mm) B
16-7/8" (429 mm) A
15-5/8" (397 mm) B
16-7/8" (429 mm) A
10-13/16" (275 mm) B
16-7/8" (432 mm) A
15-5/8" (394 mm) B
16-7/8" (432 mm) A
15-5/8" (394 mm) B
ESPREE 542 **
BACK MASSAGE
60" (1524 mm) L
42" (1067 mm) W
20" ( 508 mm) H
16-7/8" (429 mm) A
15-5/8" (397 mm) B
DRAIN/OVERFLOW
A
B
Not
Available
Yes
(S750000 HEATER KIT)
936 lb
(425 kg)/
54 lb/sq. ft.
(263 kg/m 2 )
128 lb
(58 kg)
See
Page 4
785 lb
(357 kg)/
59 lb/sq. ft.
(288 kg/m 2 )
50 Min U.S. gal
(189 liters)
58 Max U.S. gal
(220 liters)
Yes
(S750000 HEATER KIT)
NOTE: The overall dimensions are nominal with a tolerance of +0 and -1/4".
FOR ALL UNITS: Electrical Service Requirements: All require a dedicated GFCI protected separate circuit.
RapidHeat
TM : 120 VAC, 15 AMP, 60 Hz. dedicated GFCI protected separate circuit.
Motor/Pump: 120 VAC, 15 AMP, 60 Hz. dedicated GFCI protected separate circuit.
**120 VAC, 20 AMP, 60Hz. *120 VAC, 20 AMP, 60Hz.
50 Min U.S. gal
(189 liters)
61 Max U.S. gal
(231 liters)
60 Min U.S. gal
(227 liters)
68 Max U.S. gal
(257 liters)
60 Min U.S. gal
(227 liters)
68 Max U.S. gal
(257 liters)
58 Min U.S. gal
(219 liters)
66 Max U.S. gal
(250 liters)
64 Min U.S. gal
(242 liters)
73 Max U.S. gal
(276 liters)
74 Min U.S. gal
(280 liters)
89 Max U.S. gal
(336 liters)
1
Jacuzzi Whirlpool Bath© U961000G 2/05
58" x 34"
(1473 mm x 863 mm)
58" x 40"
(1473 mm x 1016 mm)
70" X 34"
(1778 mm x 863 mm)
70" X 40"
(1778 mm x 1016 mm)
58" x 40"
(1473 mm x 1016 mm)
BATHS WITHOUT INTEGRAL SKIRT, 542BM & 6032
END VIEW
H
W
SIDE VIEW
L
2"
(51 mm)
(Motor)
(Motor)