beautypg.com

JVC RX-5001VGD User Manual

Page 20

background image

17

English

Adjusting the DAP Modes

Before you start, remember...
Make sure that you have set the speaker information correctly

(see page 11).

• There is a time limit in doing the following steps. If the setting is

canceled before you finish, start from step 1 again.

• You can only adjust the rear speaker output level when you have

connected the rear speakers and have set “REAR SPK” to “YES”
(see page 11).

On the front panel:

1. Press SURROUND repeatedly

until the DAP mode — DANCE
CLUB, LIVE CLUB, HALL, or
PAVILION — appears on the
display.

The DAP indicator also lights up on the display.

2. Press ADJUST so that MULTI

CURSOR

% / fi / @ / # buttons

work for adjusting the DSP
setting.

3. Press MULTI CURSOR

% / fi

repeatedly until “– REAR +”
appears on the display.

4. Press MULTI CURSOR

@ / # to

adjust the rear speaker output
level (from –10 to +10).

Note:

You cannot adjust the left and right rear speaker output levels
separately.

5. Press MULTI CURSOR

% / fi

repeatedly until “–EFFECT+”
appears on the display.

6. Press MULTI CURSOR

@ / # to

select an effect level you want.

• Each time you press the button, the effect

level changes as follows:

As the number increases, the selected DAP mode becomes
stronger.

Adjusting the 3D-PHONIC Modes

Before you start, remember...
Make sure that you have set the speaker information correctly

(see page 11).

• There is a time limit in doing the following steps. If the setting is

canceled before you finish, start from step 1 again.

On the front panel:

1. Press SURROUND repeatedly until

“3DACTION” or “3DTHEATR”
appears on the display.

The 3D-PHONIC and PRO LOGIC indicators also light up on
the display.

2. Press ADJUST so that MULTI

CURSOR

% / fi / @ / # buttons

work for adjusting the surround
setting.

3. Press MULTI CURSOR

% / fi

repeatedly until “–EFFECT+”
appears on the display.

4. Press MULTI CURSOR

@ / # to

select an effect level you want.

• Each time you press the button, the effect

level changes as follows:

As the number increases, the selected 3D-PHONIC mode
becomes stronger.

From the remote control:

1. Press SOUND CONTROL.

The 10 keys are activated for sound adjustments.

2. Press SURROUND repeatedly until

“3DACTION” or “3DTHEATR”
appears on the display.

The 3D-PHONIC and PRO LOGIC indicators also light up on
the display.

3. Press EFFECT to select an effect

level you want.

• Each time you press the button, the effect

level changes as follows:

As the number increases, the selected 3D-PHONIC mode
becomes stronger.

SURROUND

SURROUND

MULTI CURSOR

MULTI CURSOR

EFFECT 1

EFFECT 2

EFFECT 4

EFFECT 3

EFFECT 5

ADJUST

ADJUST

MULTI CURSOR

MULTI CURSOR

EFFECT 1

EFFECT 2

EFFECT 4

EFFECT 3

EFFECT 5

SOUND

CONTROL

EFFECT 1

EFFECT 2

EFFECT 4

EFFECT 3

EFFECT 5

4

EFFECT

5

MULTI CURSOR

MULTI CURSOR

3

SURROUND

EN15-20.RX-5000&5001[UF]/F

00.2.16, 11:45 AM

17