JVC GET0091-001A - Manual (Page 21)

21
ENGLISH
SOUND ADJUSTMENTS
Adjusting the sound
You can adjust the sound characteristics to your
preference.
1
Select the item you want to adjust.
Each time you press the
button, the adjustable items
change as follows:
Indication To do: Range
BAS Adjust the bass. –06 (min.)
|
+06 (max.)
TRE Adjust the treble. –06 (min.)
|
+06 (max.)
FAD * Adjust the front R06 (Rear only)
and rear speaker |
balance. F06 (Front only)
BAL Adjust the left L06 (Left only)
and right speaker |
balance. R06 (Right only)
LOUD Boost low and high
frequencies to
produce a well-
balanced sound
at low volume
level.
VOL Adjust the volume. 00 (min.)
|
50 (max.)
* If you are using a two-speaker system, set the
fader level to “00.”
2
Adjust the level.
Note:
Normally the control dial works for volume
adjustment. So you do not have to select “VOL” to
adjust the volume level.
To increase the level.
To decrease the level.
Equalization pattern changes as
you adjust the bass or treble.
VOL
(volume)
LOUD
(loudness)
BAS
(bass)
TRE
(treble)
FAD
(fader)
BAL
(balance)
LOUD ON
|
LOUD OFF
Ex.: When you adjust “TRE”
EN21-23.KD-SX980[J]f.pm5 7/1/02, 3:22 PM 21