JVC GET0091-001A - Manual (Page 13)

13
ENGLISH
To play back only intros (Intro Scan)
You can play back the first 15 seconds of each
track sequentially.
1 Press MODE to enter the functions
mode while playing a disc.
“MODE” appears on the lower part of
the display, and the number buttons
work as different function buttons.
2 Press INT (intro), while “MODE” is
still on the display.
Each time you press INT (intro)
while playing a disc, the intro scan
mode turns on and off alternately.
When the intro scan mode is turned on, “INT”
appears on the display for 5 seconds and the
track number flashes.
Track number of the
currently playing track
Prohibiting CD ejection
You can prohibit CD ejection and can lock a disc
in the loading slot.
While pressing CD CD-CH, press and
hold
for more than 2 seconds.
“NO EJECT” flashes on the display for about 5
seconds, and the disc is locked and cannot be
ejected.
To cancel the prohibition and unlock the disc,
press
again for more than 2 seconds,
while pressing CD CD-CH.
“EJECT OK” flashes on the display for about 5
seconds, and the disc is unlocked.
Playing a CD Text
In a CD Text, some information about the disc (its
disc title, performer and track title) is recorded.
You can show these disc information on the
display.
Select text display mode while playing a
CD Text.
Each time you press the button,
the display changes as follows:
Notes:
• When the disc title/performer is shown, the DISC
indicator lights up.
When the track title is shown, the TRACK indicator
lights up.
• The display shows up to 8 characters at one time
and scrolls if there are more than 8 characters.
Some characters or symbols will not be shown (and
be blanked) on the display.
(Ex. “ABCå!d#”
]“ABCA D ”)
• When you press DISP (display) while playing a
conventional CD, “NO NAME” appears for the disc
title/performer and the track title.
Disc Title / Performer Track Title
Current track no.
and Elapsed playing time
EN11-13.KD-SX980[J]f.pm5 7/1/02, 3:21 PM 13