JVC HR-J580EK - Manual (Page 44)

advanced features 44
Manual Channel Setup
get to the confirmation screen
Press m. Move the
highlight bar to MANUAL CH SET using the A and B buttons
and press O (or E).
select position
Use the
M
button on the Remote Control to move the highlight bar
to a vacant position then press O.
In this example, we have chosen position 6.
select band
When the MANUAL
CH SET screen appears, press the
A and B buttons to
change the band between CH
(regular) and CC (cable).
input channel number
Press
the E button and you will see
the channel number space flash-
ing. Use the number keys to enter the Channel Number that you want to store.
input channel id
Press the E button to move to the Channel ID space and use the A
and B buttons to select the required ID from the stored list.
fine tuning
Press the E button to move to the Fine Tuning ‘+/–’ and use the A and
B buttons to fine-tune the channel. A ‘+’ or a ‘–’ symbol will appear during this process.
save new channel details
Press O to save the details you have just entered. The Confir-
mation Screen will appear again. Repeat the above procedure from Select Position onwards as
many times as required.
close confirmation screen
Press m.
[1] a k
[MENU]: EXIT
MAIN MENU
MODE SET
AUTO CH SET
MANUAL CH SET
INITIAL SET
F
PR
01
02
03
04
05
06
07
CH
26
33
23
30
37
[10]
a
k: EDIT
a [x]: DELETE
[MENU]: EXIT
ID
BBC1
BBC2
ITV
CH4
CH5
- - - -
- - - -
PR
08
09
10
11
12
13
14
CH ID
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
- - - -
[0–9]: SELECT
[0]: CURSOR g
k
: OK
[MENU]: EXIT
PR
06
CH
CH21
ID
- - - -
FINE
+/–