JVC HR-J580EK - Manual (Page 40)

advanced features 40
Auto Timer
When the AUTO TIMER is set to ON , the timer is automatically engaged when the VCR power is
turned off and automatically disengaged when the VCR is powered back on.
get to the mode set screen
Press m. Move the highlight
bar to MODE SET using the A and B buttons and press
O (or E).
enable/disable auto timer
Select AUTO TIMER using the
A and B buttons and press O(or E) to toggle
between ON and OFF .
return to normal screen
Press m.
Repeat Playback
start repeat pl ayback Press ., then press and hold . again for over 5 seconds, then release.
The Play indicator (
#
) will flash on the display panel and the VCR will automatically playback
and rewind the tape 100 times and then stop.
stop pl ayback
Pressing S, ., < or > stops repeat playback.
Next Function Memory
pl ay
To playback immediately after rewinding, press < and then . within 2 seconds.
power off
To power off the VCR immediately after rewinding, press < and then o
within 2 seconds.
timer standby
To put the VCR in timer standby mode immediately after rewinding, press
< and then c within 2 seconds.
[1] a k
[MENU]: EXIT
MODE SET
B.E.S.T. ON
PICTURE CONTROL AUTO
AUTO TIMER ON
O.S.D. ON
DIRECT REC ON
AUTO SP a LP TIMER OFF
POWER SAVE ON
F