JVC XV-S60 - Manual (Page 9)

Preliminary knowledge
7
Pre
lim
in
ar
y
know
le
dg
e
English 8 4/PREVIOUS button (23, 26, 41)
Skips back a chapter, title or track. Also used for the
page selection of a menu screen (for DVD VIDEO/Video
CD).
Holding down this button during playback reverses
playback rapidly (except MP3 disc).
9 7/CLEAR button (22, 24, 31, 41)
Stops playback. Also used to clear all the programmed
selection for the program play.
0 1/SLOW– button (23, 30)
Pressing this button during playback reverses playback
rapidly.
Pressing this button while a DVD VIDEO disc is paused
reverses playback slowly.
- TITLE button (25)
Displays the title menu of a DVD VIDEO disc on the TV
screen.
= CURSOR ( 5 Up, ∞ Down) - CH (+/–) buttons
When the TV - DVD switch is set to DVD, these buttons
are used to select an item from a menu or on-screen
display, or to change the setting of an on-screen
display item.
In this case, we call them “CURSOR
5/∞” buttons in
this manual.
When the TV - DVD switch is set to TV, they are used
to select a TV channel.
~ CHOICE button (44)
Brings up the preference on-screen display on the TV
screen.
! Infrared signal-emitting window
Point this window toward the remote sensor on the
front panel when pressing buttons.
@ TV STANDBY/ON button (19)
Turns the TV on or off (standby).
# TV - DVD switch (12, 19, 25)
When setting this switch to “TV”, the numeric, cursor
and TV/VIDEO - CANCEL buttons are used to control
your TV.
When setting it to “DVD”, these buttons are used to
control the unit.
$ DVD STANDBY/ON button (21)
Turns the unit on or off (standby).
% RETURN button (26)
Returns to the previous menu (for DVD VIDEO/Video
CD).
^ TV/VIDEO - CANCEL button (19, 25)
Switches the TV input mode when the TV - DVD switch
is set to TV.
Cancels the last selection of the program when the
TV - DVD switch is set to DVD.
& VFP - PROGRESSIVE SCAN button (15, 38)
Pressing this button brings up the VFP window in which
you can select or adjust the picture character.
Holding down this button for a few seconds switches
the progressive scan mode on or off. See “How to make
the Progressive scan mode active” on page 15 for details.
* AUDIO button (37)
Selects the audio (for DVD VIDEO/Video CD).
( ZOOM +/– buttons (30)
Zooms in or out the picture (for DVD VIDEO/Video CD).
) ¢/NEXT button (23, 26, 41)
Skips forward a chapter, title or track. Also used for the
page selection of a menu screen (for DVD VIDEO/Video
CD).
Holding down this button during playback advances
playback rapidly (except MP3 disc).
_ 8/STROBE button (22, 29, 41)
Pauses playback. Also, used to display nine continuous
still pictures (STROBE function).
+ 3/SELECT button (22, 25, 41)
Starts playback. Also used as a SELECT button for PBC
of Video CDs.
¡ ¡/SLOW+ button (23, 30)
Pressing this button during playback advances
playback rapidly.
Pressing this button while a DVD VIDEO or Video CD
disc is paused advances playback slowly.
• MENU button (25)
Displays a DVD menu on the TV screen.
£ ENTER button
Executes the selected item in a menu or on-screen
display.
¢ CURSOR ( 2 Left, 3 Right) - VOL (+/–) buttons
When the TV - DVD switch is set to DVD, these buttons
are used to select an item from a menu or on-screen
display, or to change the setting of an on-screen
display item.
In this case, we call them “CURSOR
2/3” buttons
in this manual.
When the TV - DVD switch is set to TV, they are used to
change the TV audio volume.
ON SCREEN button
Brings up an appropriate on-screen display for
controlling advanced functions for the current disc on
the TV screen.
6(1*ERRN 3DJH :HGQHVGD\ 0D\ 30