Audio and system preference, Progressive mode, Digital audio output – JVC XV-S60 User Manual
Page 48

Initial settings
46
Init
ial
s
e
tti
ng
s
PROGRESSIVE MODE
You can select the 
progressive mode from the 
following options.
•
AUTO
The unit recognizes the picture type (film or video 
source) of the current disc according to the disc 
information.
•
VIDEO 1
Suitable for playing back a video source disc with 
static (inactive) pictures.
•
VIDEO 2
Suitable for playing back a video source disc with 
dynamic (active) pictures.
•
FILM
Suitable for playing back a film or progressive source 
disc.
•
SMART
Used to playback a disc containing both video and 
film source materials. The unit recognizes the picture 
type according to the current data.
* Normally, set the PROGRESSIVE MODE to “AUTO”.
* Some DVD discs may not be played back correctly 
with the “AUTO” mode. If the playback picture is 
unclear or noisy with a particular DVD Video disc, try 
to change the mode.
The
“
PREFERENCE 2
”
display handles preferences
related to audio and system.
DIGITAL AUDIO OUTPUT
To connect the unit’s digital 
output to an external device 
equipped with a digital 
input, this item must be set 
correctly.
•
PCM ONLY
Should be selected when you connect the DIGITAL 
OUT jack of the unit to the linear PCM digital input of 
other audio equipment.
• STREAM/PCM
Should be selected when you connect to the digital 
input of an amplifier to a built-in DTS, Dolby Digital, or 
MPEG multichannel decoder.
• DOLBY DIGITAL/PCM
Should be selected when you connect to the digital 
input of a Dolby Digital decoder, or an amplifier with a 
built-in Dolby Digital decoder.
The following chart shows the relationship between 
types of playback discs and output signals.
* With some DVD VIDEO discs that are not fully copy-
protected, a 20 or 24 bit digital signal may be output.
NOTE
• When playing back a film-source DVD Video disc with
the “PROGRESSIVE MODE” set to “FILM”, “SMART” or 
“AUTO” and the progressive scan made is active,the 
PROGRESSIVE indicator on the front panel lights. (See 
page 15.)
Audio and system preference
PREFERENCE2
PREFERENCE1
MENU LANGUAGE
ENGLISH
AUDIO LANGUAGE
ENGLISH
SUBTITLE
OFF
ON SCREEN LANGUAGE
ENGLISH
ON SCREEN GUIDE
ON
MONITOR TYPE
SELECT
KEY
PROGRESSIVE MODE
AUTO
4:3 LB
PREFERENCE2
PREFERENCE1
DIGITAL AUDIO OUTPUT
STREAM/PCM
DOWN MIX
Lo/Ro
COMPRESSION
ON
AUTO STANDBY
OFF
SCREEN SAVER
SELECT
KEY
MODE 1
AV COMPULINK MODE
DVD 1
Playback discs
Output
STREAM/
PCM
DOLBY 
DIGITAL/
PCM
PCM ONLY
DVD with 48 kHz, 
16 bit linear PCM
48 kHz,16 bit, 
stereo linear 
PCM
+
+
DVD with 48 kHz, 
20/24 bit linear 
PCM
48/44.1 kHz,
16 bit, stereo 
linear PCM*
+
+
DVD with 96 kHz, 
linear PCM
48 kHz, 16 bit, 
stereo linear 
PCM*
+
+
DVD with DTS
DTS bitstream 48 kHz, 16 bit,
stereo linear 
PCM*
+
DVD with Dolby 
Digital
Dolby Digital 
bitstream
+
48 kHz, 16 bit, 
stereo linear 
PCM*
DVD with MPEG 
multichannel
MPEG 
bitstream
48 kHz, 16 bit, 
stereo linear 
PCM
+
Video CD
44.1 kHz,
16 bit, stereo 
linear PCM
+
+
Audio CD
44.1 kHz,16 
bit, 
stereo linear 
PCM
+
+
Audio CD with DTS DTS bitstream 44.1 kHz,
16 bit, stereo 
linear PCM
+
CD -R/RW with 
MP3
No output
+
+
NOTES
• The unit does not provide the DTS decoding function.
• When playing a DVD VIDEO or Audio CD disc with DTS,
use a DTS decoder to get correct signals from your 
speakers.
3HQJIP 3DJH :HGQHVGD\ 0D\ $0
