JVC XV-S60 - Manual (Page 54)

Additional information
52
Ad
dit
ion
al
info
rm
at
ion
You can enjoy pictures and/or sound by just putting a source component (which plays back the pictures and/or sound
such as a DVD player or VCR) into play mode. You do not have to operate the TV and receiver including not having to
perform power switching.
1 Turn on the main power of the television.
2 Insert a disc into the source component.
3 Press 3 of the source component.
The following actions are performed automatically:
• Turning on the power for the television.
• Setting the source of the television to the external input (VIDEO-1 or VIDEO-2).
• Turning on the power for the receiver.
• Setting the source of the receiver to the component which has started playback.
IMPORTANT!
You connect the component video output to your TV:
• Set the DVD player’s AV COMPULINK setting to DVD1.
• Make the video/audio connection between the DVD player and your receiver using the supplied audio/video cable, and do
not make the S-VIDEO connection.
Notes for connection
• If you connect a DVD player to a receiver via AV COMPU LINK in a system including a Dolby digital decoder, some functions
may not be performed automatically.
• The AV COMPU LINK terminal on some televisions indicates “ II.” Do not connect the terminal indicating “ II” with the AV
COMPU LINK terminal on a receiver. If connected, the system will not work correctly.
• Connect the AUDIO OUT jacks of the DVD player to the audio input jacks of a receiver that indicating “ DVD.” Otherwise, the
system will not work correctly.
• There may be no description about connections to a DVD player in the instruction manual of a television or VCR. However a
television or VCR with AV COMPU LINK terminals indicating “ II” or “ EX” can be connected to a DVD player.
Operation
6(1*ERRN 3DJH :HGQHVGD\ 0D\ 30