Storage, Removing from storage – John Deere OMGX20927 User Manual
Page 20

Storage - 16
STORAGE
St orage
Storage
1. Remove the bagger from the machine.
2. Empty and clean the hopper, chute and bags.
3. Remove any ballast used during bagging. This will
ensure proper operation of the mower when the bagger is
not used.
4. If you are using a special mower blade for bagging,
remove it and use the correct mower blade.
5. Replace missing or damaged parts. Make sure all
hardware is secure.
6. Paint scuffed metal surfaces to prevent rust.
7. If possible, store the bagger in a cool, dark place. If it
must be stored outside, put a weather-proof cover over it.
Removing From Storage
1. Remove bagger from storage and clean if necessary.
2. Install bagger.
3. Install the proper ballast.
4. If you are using a special mower blade for bagging,
make sure it is installed.
- LA145 (52 pages)
- X300 (2 pages)
- LA145 (1 page)
- 318 (440 pages)
- z425 (48 pages)
- LA115 (1 page)
- 75C (6 pages)
- 50C ZTS (8 pages)
- OMM141979 J9 (36 pages)
- 5303 (16 pages)
- 850C LGP (5 pages)
- 435C (2 pages)
- 4520 (12 pages)
- 125 (11 pages)
- 310SE (5 pages)
- 410J TMC (40 pages)
- 5083EN (1394 pages)
- PrecisionCut 8700 (16 pages)
- HLOADERS 624H WH (10 pages)
- J BACKHOES 310SJ (40 pages)
- 850J (16 pages)
- 717 Z-TRAK (12 pages)
- 1050J (20 pages)
- PrecisionCut 7200 (16 pages)
- 315SJ (6 pages)
- Select Series X520 (2 pages)
- Greens 180C (8 pages)
- AUTOTRAC OMPFP11320 (72 pages)
- 5204 (194 pages)
- 544J WH (5 pages)
- 244J (18 pages)
- D-SERIES 319D (20 pages)
- GREENSTAR BZ13788 (30 pages)
- POWERTECH 6068 (250 pages)
- 550H LGP (5 pages)
- 495D (3 pages)
- DM1150 (4 pages)
- Ultimate X720 (2 pages)
- 6300 (2 pages)
- 225D LC (24 pages)
- 544J (32 pages)
- 315 (2 pages)
- GT2554 (56 pages)
- 20 (4 pages)