John Deere OMGX20927 - Manual (Page 11)

Installing - 7
INSTALLING
MX10378 MX10379
4. Hook rear wireform (C) behind gage wheel bracket (E).
NOTE: Make sure discharge chute assembly does not
get caught inside mower deck discharge opening.
MX10380
5. Slide discharge chute forward to fit front wireform (D) on
lower discharge chute behind the hardware on the hinge
bracket (F) of the chute deflector.
MX10381
6. Make sure discharge chute is seated completely inside
lip (I) of deck .
7. Hook front rubber strap latch (G) through hole (H) in
gage wheel bracket.
MX10382
8. Slide top (J) of upper chute into hopper top.
9. Slide bottom (K) of upper chute over top (L) of lower
chute, aligning notch (N) with bolt (M).
10.Hook rubber strap latch (O) onto bolt (M) in lower chute.
c
CAUTION: Avoid injury! Prevent possible
thrown objects. The discharge chute assembly
must fit tight against the chute hinge bracket
and completely cover the mower deck
discharge opening.
D
C
C
E
D
F
H
G
I
J
M
N
O
L
K