Systems with in-ceiling satellite speakers, System #6 – JBL SB210 User Manual

Page 18

Satellite
Outputs

Left

Right

System #6 in Mono

SPL (at 10 Feet):

96 dB Continuous (peaks of 106 dB)

From
Power
Amp

Left/Mono

SUBWOOFER:
Control SB-210 &
MTC-210-SAT Crossover Input Module

MODULE SETTINGS:
Stereo / Mono Selector: Mono
4-Ohm / 8-Ohm Selector: 8-Ohms

Input

Terminals

Control SB-210 with

MTC-210-SAT

Crossover Input Module

Control 24C

Control 29AV-1

(8 Ohm Setting)

Control 24C

Systems with

IN-CEILING

Satellite Speakers

Connection

Mono Operation

– Connect input to the LEFT input termi-

nal. Put Stereo/Mono header into MONO position. Con-

nect 2 pcs of Control 24C to each satellite output (LEFT

and RIGHT). Do NOT connect all 4 satellite speakers to

a single satellite output.

Stereo Operation – Connect left and right inputs to the

LEFT and RIGHT input terminals. Put Stereo/Mono

header into STEREO position. Connect 2 pcs of Control

24C to each of the Satellite Outputs (LEFT and RIGHT)

In-ceiling loudspeakers can benefit from the addition of a subwoofer. Often that takes the form factor of an in-ceiling subwoofer like

Control 19CS or Control 312CS, but it may be desirable to use a subwoofer with a full passive crossover. For more information

about model selection, see the “Subwoofer Model Selection” and “Designing for Other JBL Subwoofer Models” sections, above.

The SB-210 with MTC-210-SAT module is a subwoofer that contains a built in passive crossover, which makes it easy to structure

subwoofer/satellite systems. With in-ceiling satellite speakers, the SB-210 can be mounted on a wall or ceiling via the MTC-210U U-

bracket, suspended from the ceiling via built-in suspension points, or installed above an air grate grille in the ceiling.

System #6

4 pcs Control 24C with Control SB-210

Application:

Medium volume, high-fidelity music

reproduction where 4 in-ceiling satellite speakers are needed
to cover the area.

Max Continuous Average SPL (at 10 feet):

96 dB

(with peaks of 106 dB).

4 Ohm / 8 Ohm Setting:

4 Ohms.

Stereo/Mono Capability:

Either setting can be utilized