JBL SB210 - Manual (Page 16)

Satellite
Outputs
Left Right
System #5 in Mono
SPL (at 20 Feet):
94 dB Continuous (peaks of 104 dB)
MODULE SETTINGS:
Stereo / Mono Selector: Mono
4-Ohm / 8-Ohm Selector: 4-Ohms
Control SB-210 with
MTC-210-SAT Crossover Input Module
Control 25AV
(8 ohm setting)
Control 25AV
(8 ohm setting)
Control 25AV
(8 ohm setting)
Control 25AV
(8 ohm setting)
From
Power
Amp
Left/Mono
Input
Terminals
System #5
4 pcs Control 25AV & Control SB-210
Application
Medium volume, high-fidelity music reproduction where 4
satellite speakers are needed to cover the area.
Max Continuous Average SPL (at 20 feet)
94 dB (with peaks of 104 dB)
Max Output Balance
The subwoofer has higher maximum output capability than
the satellite speakers and the output capability can be further
boosted by placing the subwoofer at a boundary junction or
corner. This system has the capability of being utilized for
applications where the bass will be EQ’d substantially higher
than the mids and highs. The system also works fine for flat-
response applications.
4 Ohm / 8 Ohm Setting
4 Ohms
Stereo/Mono Capability
Either setting can be utilized
Connection
Mono Operation – Connect input to the LEFT input termi-
nal. Put Stereo/Mono header into MONO position. Con-
nect 2 pcs of Control 25AV to each satellite output (LEFT
and RIGHT). Do NOT connect all 4 satellite speakers to
a single satellite output.
Stereo Operation – Connect left and right inputs to the
LEFT and RIGHT input terminals. Put Stereo/Mono
header into STEREO position. Connect 2 pcs of Control
25AV to each of the Satellite Outputs (LEFT and RIGHT)
Application Notes
Balance -- The subwoofer has higher maximum output
capability than the satellite speakers and the output
capability can be further boosted by placing the subwoofer
at a boundary junction or corner. This system has the
capability of being utilized for applications where the bass
will be EQ’d substantially higher than the mids and highs.
The system also works fine for flat-response applications.
Variations -- Control 25 speakers can be utilized instead of
Control 25AV for a more cost-effective system, resulting in
slightly lower overall fidelity, but 1 dB louder SPL.
Connection Diagrams
14 15