JBL SB210 - Manual (Page 10)

System #2
2 pcs Control 25AV & Control SB-210
Application: Light to medium volume ambient music in
small to medium sized spaces where two satellite speakers are
enough to cover the area. This system produces excellent high
fidelity sound quality with very strong bass.
Max Continuous Average SPL (at 20 feet): 91 dB (with
peaks of 101 dB)
Max Output Balance -- The subwoofer has substantially
higher maximum output capability than the satellite speakers,
so this system has the capability of optionally being utilized in
applications where the bass will be EQ’d substantially higher
than the mids and highs. The system also works fine for flat-re-
sponse applications.
Lower-Cost Option: Less expensive Control 25 speakers
can be utilized instead of Control 25AV for a more cost-effec-
tive system. The system will have slightly lower overall fidelity,
but will get 1 dB louder.
4 Ohm / 8 Ohm Setting: 8 Ohms
Stereo/Mono Capability: Either setting can be utilized.
Connection:
Mono Operation – Connect input to the LEFT/MONO
input terminal. Put Stereo/Mono header into MONO
position. Connect 1 pc of Control 25AV to each satellite
output (LEFT and RIGHT). Do NOT connect both satel-
lite speakers to a single satellite output.
Stereo Operation – Connect left and right inputs to the
LEFT and RIGHT input terminals. Put Stereo/Mono
header into STEREO position. Connect 1 pc of Control
25AV to each of the Satellite Outputs (LEFT and RIGHT)
Connection Diagrams
Satellite
Outputs
Left Right
System #2 in Mono
SPL (at 20 Feet):
91 dB Continuous (peaks of 101 dB)
From
Power
Amp
Left/Mono
SUBWOOFER:
Control SB-210 &
MTC-210-SAT Crossover Input Module
MODULE SETTINGS:
Stereo / Mono Selector: Mono
4-Ohm / 8-Ohm Selector: 8-Ohms
Input
Terminals
8 9