Jaton Communicator V.90 - Manual (Page 62)

62
S-Register Summary
Registe Function Range Units Saved* Default
S0 Rings to auto-answer 0-255 Rings Yes 0
S1 Ring counter 0-25 Rings 0
S2 Escape character 0-255 ASCII Yes 43
S3 Carriage return character 0-127 ASCII 13
S4 Line feed character 0-127 ASCII 10
S5 Backspace character 0-255 ASCII 8
S6 Wait before for dialing 2-255 1 sec Yes 2
S7 Wait for carrier 1-255 1 sec Yes 50
S8 Pause time for dial delay modifier 0-255 1 sec Yes 2
S9 Carrier detect response time 1-255 0.1sec Yes 6
S10 Lost carrier hang up delay 1-255 0.1sec Yes 14
S11 DTMF dialing speed 50-255 0.001s Yes 70
S12 Guard Time 0-255 0.02s Yes 50
S14 Bit-mapped options (read only) Yes 170
S16 Modem Test Options (read only) 0
S18 Modem Test timer 0-255 1.0s Yes 0
S21 Bit-mapped options (read only) Yes 48
S22 Bit-mapped options (read only) Yes 118
S23 Bit-mapped options (read only) Yes none
S25 Detect DTR change 0-255 0.01 s Yes 5
S27 Bit-mapped options (read only) Yes 739
S30 Disconnect inactivity timer 0-255 minute Yes 0
S31 Bit-mapped options (read only) Yes none
S32 Vx mode enable
Bit 5 = 1, Bit 5=0, V.34 0-255 Yes 32
S33 Sleep mode timer
When S33<>0, the modem enters sleep
mode whenever it has been inactive for a
user programmable delay (S33).
The modem considered to be inactive
state when:
1. No internal processing is performed.
2. No activity occurs between the host
and the modem.
3. The modem is off-line
0-90 second Yes 10