Jaton Communicator V.90 - Manual (Page 18)

18
CHAPTER 3 SOFTWARE
Once The Communicator V.90 card is configured with proper jumpers for
the hardware and installed in the PC system, it is ready to use.
Driver installation
The Windows®9x operating system require you to install proper modem
drivers. You may either install the Standard Modem drivers or install
manufacture’s modem driver. Have the driver disk and operating system
disk handy before you install the driver.
WINDOWS®9X DRIVER INSTALLATION:
1) If your modem is set to PnP, when Windows 9x starts up
again after the new board is installed in the system, it will
detect the new hardware devices, and prompt you to install
proper drivers for the devices.
Select “Driver from disk provided by hardware manufacture”
and click “OK”. Go to step 9). If you select alternate drivers,
you may change the drivers later.
If you set the modem Com port and IRQ manually, you may
not see the above screen automatically. Simply insert the
CD into the CD-ROM drive, the “SUPER.EXE” program will
search for valid modem and guide you through the driver
installation. However you may also follow the MS