Jaton Communicator V.90 - Manual (Page 56)

56
\K3 Nondestructive/expedited
\K5 Nondestructive/nonexpedited
In command state, transmit break to remote (if in reliable
mode):
\K0,1 Destructive/expedited
Command Description
\K2,3 Nondestructive/expedited
\K4,5 Nondestructive/nonexpedited
In connect state, receives break at modem port (if in direct
mode):
\K0,2,4 Immediately sends break and enters command state
\K1,3,5 Immediately sends the break through
In connect state, receives break at modem port and sends to serial port:
\K0,1 Destructive/expedited
\K2,3 Nondestructive/expedited
\K4,5 Nondestructive/nonexpedited
\Nn Set operating mode (Default=3)
\N0 Selects normal mode with speed buffering
\N1 Selects normal mode with speed buffering
\N2 Select MNP reliable mode
\N3 Select V.42 auto-reliable mode
\N4 Select V.42 reliable mode
\O Originate reliable link
\Qn Set serial port flow control (Default=3)
\Q0 Disables flow control
\Q1 XON/XOFF software flow control
\Q2 Unidirectional hardware flow control
\Q3 Bi-directional hardware flow control
\T0 Disable inactivity timer (Default=0)
\U Accept reliable link
\Xn Set XON/XOFF pass-through (Default=0)
\X0 Processes flow control characters
\X1 Processes flow control characters and passes to local or remote
\Y Switch to reliable mode
\Z Switch to normal mode
-Jn Set V.42 detect phase (Default=1)
-J0 Disables the V.42 detect phase
-J1 Enables the V.42 detect phase