JVC GET0483-001A - Manual (Page 21)

ENGLISH
21
Symptoms Remedies/Causes
MP3/WMA playback
• Disc cannot be played back. • Use a disc with MP3/WMA tracks recorded in a format
compliant with ISO 9660 Level 1, Level 2, Romeo, or
Joliet.
• Add the extension code <.mp3> or <.wma> to the
file names.
• Noise is generated. Skip to another track or change the disc. (Do not add the
extension code <.mp3> or <.wma> to non-MP3 or
WMA tracks.)
• A longer readout time is required (“READING”
keeps flashing on the display).
Do not use too many hierarchical levels and folders.
• Tracks do not play back in the order you have
intended them to play.
The playback order is determined when the files are
recorded.
• The elapsed playing time is not correct. This sometimes occurs during playback. This is caused by
how the tracks are recorded on the disc.
• The correct characters are not displayed (e.g.
album name).
This unit can only display letters (upper case), numbers,
and a limited number of symbols.
iPod playback
• The iPod does not turn on or does not work. • Check the connecting cable and its connection.
• Update the firmware version.
• Charge the battery.
• The sound is distorted. Deactivate the equalizer either on the unit or the iPod.
• “NO IPOD” appears on the display. • Check the connecting cable and its connection.
• Charge the battery.
• Playback stops. The headphones are disconnected during playback. Turn
off the unit’s power and turn it on again.
• No sound can be heard when connecting an
iPod nano.
• Disconnect the headphones from the iPod nano.
• Update the firmware version of the iPod nano.
• “NO FILES” appears on the display. No tracks are stored. Import tracks to the iPod.
• The iPod’s controls do not work after
disconnecting from this unit.
Reset the iPod.
• “CANNOT PLAY” appears on the display. Communication error occurs.
Disconnect and connect the cable to the iPod again.
EN14-23_KD-APD49[J]f.indd 21 EN14-23_KD-APD49[J]f.indd 21 11/13/07 10:57:32 AM 11/13/07 10:57:32 AM