beautypg.com

Initializing a memory card – JVC GR-D850U User Manual

Page 27

background image

EN

27

D.S.C. Recording & Playback

ENGLISH

To Print By Selecting Still Images
And Number Of Prints

1

1

Perform

steps

1

4

4

in “To Print All Still

Images (One Print For Each)” (

੬ 26).

2

2

Select

“CURRENT”,

press

SET. The DPOF

screen appears.

3

Press or to select the desired fi le.

4

4

Press or to select the number

indication (00), and press SET.

5

5

Select the number of prints by pressing

to increase the number, or to decrease
the number, and press SET.

• Repeat

steps

3

3

through

5

5

for the desired

number of prints.

• The number of prints can be set up to 15.
• To correct the number of prints, select the

image again and change the number.

6

6

Select

“RETURN”,

press

SET

. The “SAVE?”

appears.

• If you did not change any settings in step

3

3

through

5

5

, the DPOF Menu reappears.

7

7

Select

“EXECUTE”,

press

SET.

• To cancel selection, select “CANCEL”.

To Reset The Number Of Prints

1

1

Perform

steps

1

4

4

in “To Print All Still

Images (One Print For Each)” (

੬ 26).

2

2

Select

“RESET”,

press

SET. The DPOF

screen appears.

3

3

Select

“EXECUTE”,

press

SET.

• To cancel selection, select “RETURN”.
• The number of prints is reset to 0 for all still

images.

Caution:
While performing the above, never disconnect

power, as this may cause the memory card to
be corrupted.

Note:
When the image is printed from the printer, a

black bar appears at the bottom of the screen.
This is not a malfunction. By recording with
“DIS” deactivated (

੬ 29) this can be avoided.

Initializing A Memory Card

You can initialize a memory card any time.
After initializing, all fi les and data stored in
the memory card, including those which have
been protected, are cleared.

1

1

Perform

steps

1

3

3

in “Normal Playback

Of Images” (

੬ 24).

2

Press

MENU.

3

Select “MEMORY CARD” ( ).

4

4

Select

“FORMAT”,

press

SET. The

FORMAT menu appears.

5

5

Select

“EXECUTE”,

press

SET. The

memory card is initialized.

• When initialization is fi nished, “NO

IMAGES STORED” appears.

• To cancel initialization, select “CANCEL”.

1

3

4

5

6

GR-D850&870US_EN.indb 27

GR-D850&870US_EN.indb 27

11/12/2007 2:48:08 PM

11/12/2007 2:48:08 PM

This manual is related to the following products: