JVC XV-M50BK - Manual (Page 7)

5
Pre
lim
in
ar
y
know
le
dg
e
English
Preliminary knowledge
Names of parts and controls
Refer to the corresponding pages indicated in () for details.
Front panel
1 STANDBY indicator
Lights when the power cord is connected and the unit
is on standby. When the unit is turned on, the STANDBY
indicator goes off.
2 STANDBY/ON button (20)
Turns the unit on or off (standby).
3 DISC 1 through DISC 3 trays (20)
Used to load discs. To insert/remove a disc, press the
0
(OPEN/CLOSE) button.
4 0 (OPEN/CLOSE) buttons (20)
Used to open and close the corresponding disc trays
(1 to 3).
5 DISC 1 through DISC 3 buttons with indicators
Used to start playback of the disc in the corresponding
tray with the number indicated on the button. While
playing, the corresponding indicator blinks.
6 Remote sensor
Receives signals from the remote control unit.
7 Display window (8)
Indicates the current status of the unit.
8 4/¢ (SKIP) buttons (22)
Used to skip a chapter, title or track.
Also, used for the page selection of a menu screen
(for Video CD).
Holding down
4
or ¢ during playback reverses or
advances playback rapidly.
9 7 (STOP) button (21)
Stops blayback.
Also used to change the video output setting
(See page 14).
0 3 (PLAY) button (21)
Starts playback. Also, used as a SELECT button for PBC of
Video CDs.
- 8 (PAUSE) button (21, 28)
Pauses playback.
Also, used to display nine continuous still pictures
(STROBE function).
3
2
1
DISC TITLE CHAP RESUME THEATER
DVD EACH
STANDBY
STANDBY/ON
PAUSE PLAY STOP SKIP
DISC 3
3 8 7
0
DISC 2 0
DISC 1 0
¢ 4
DISC 3
DISC 2
DISC 1
DOLBY
D I G I T A L
XV-M50 DVD/CD PLAYER
6 Remote sensor
1 STANDBY indicator
2 STANDBY/ON button
- 8 (PAUSE) button
0 3 (PLAY) button
9 7 (STOP) button
8 4/¢ (SKIP) buttons
3 DISC 1 through
DISC 3 trays
4 0(OPEN/CLOSE) buttons
5 DISC 1 through
DISC 3 buttons
with indicators
7 Display window
PLAY & EXCHANGE
DVD / VIDEO CD / CD
10-bit/27MHz VIDEO D/A CONVERTER
M50-ENG.book Page 5 Friday, March 9, 2001 12:00 PM