JVC CA-EX90 - Manual (Page 34)

34
CA-EX90
REPEAT 1 CD REPEAT ALL REPEAT 1
Repeat Play Mode
This play mode lets you repeat the current track, the current CD, or all the tracks on all the CDs.
1 Press REPEAT repeatedly to select the repeat
mode.
Each time you press REPEAT, the repeat modes switch
as follows:
REPEAT ALL
Repeats all the tracks on all CDs.
This mode can be selected in any play mode.
REPEAT 1 CD
Repeats all the tracks on the current CD.
This mode can only be selected during the normal
(continuous) play mode.
REPEAT 1
Repeats the current track.
This mode can be selected in any play mode.
2 Press ‹/8 to start repeat playback.
Note: The repeat mode can also be selected while
playing
To cancel repeat playback
Press REPEAT repeatedly to turn off the REPEAT indicator.
Tray Lock
This function electronically locks the main tray so that it can not be opened simply by pressing one of
the
0 buttons.
1 Set the power to the STANDBY mode.
If the power is presently ON, press POWER.
2 Press 0 for CD 1 while holding down &/
CANCEL.
“LOCKED” appears in the display and the main tray is
locked.
• When the main tray is locked, the display shows
“LOCKED” and the main tray cannot be opened.
• When a 0 is pressed during the STANDBY mode,
“LOCKED” appears in the display and the unit
remains in the STANDBY mode.
To unlock the tray
Repeat steps 1 and 2 above.
“UNLOCKED” appears in the display and the main tray is
unlocked.
•
Pressing a
0 opens the selected tray.
• When a 0 is pressed during the STANDBY mode, the
power is turned on and the selected tray opens
automatically.
Off (mode cancelled)
REPEAT
/CANCEL
CD 1
/CANCEL
+
EN28-40.CA-EX90[J]/1 98.6.8, 8:26 AM 34