JVC CA-EX90 - Manual (Page 20)

20
CA-EX90
Turning on the Power
Press POWER.
The STANDBY indicator goes out and “HELLO” appears in
the display.
ME-EX90 subuwoofer amplifier also turns on.
•
Pressing POWER of RX-EX90 turns on the source
component previously selected.
• Pressing POWER of the other EX90 components (CD
player, etc.) also turns on the amplifier/tuner.
To turn off the power
Press POWER again.
The STANDBY indicator lights up and the display shows
“GOOD-BYE”, then turns to the clock.
If you have made the Compu Link connection (page 41):
•Other optional components also turns off.
Adjusting the Volume
From the front panel
Rotate VOLUME.
The volume level appears in the display.
•
Rotate to the right (UP) to increase the volume, rotate to
the left (DOWN) to decrease the volume.
• Rotate VOLUME quickly to make large changes, rotate
slowly to make small changes.
From the remote control
Press VOLUME or .
Press to increase the volume, press to decrease the
volume. Hold down to make a continous change.
• The volume can be set between 0 and 50.
Notes
• The volume cannot be changes while the unit is in the
STANDBY mode.
• Be sure to turn the volume down before setting the unit
to the STANDBY mode.
To mute the sound
Press FADE MUTING.
When you press FADE MUTING, the volume level
decreases to 0 (MUTING). Pressing it again restores the
volume. To raise the volume, press VOLUME
.
Amplifier Operations
Goes out.
Front panel Remote control
STANDBY
POWER
VOLUME
UP DOWN
VOLUME
FADE
MUTING
POWER
EN01-23.CA-EX90[J]/5/18 98.6.8, 8:21 AM 20