JVC SP-UXH100 - Manual (Page 16)

13
Basic Disc Operations
While playing a disc, you can do the following operations.
To stop playing for a moment
During play, press CD
3/8.
While pausing, the elapsed playing time flashes on
the display.
To resume playing, press CD 3/8 again.
To go to another track
Before or during play, press
¢ or 4
(or UP ¢ or DOWN 4 on the unit)
repeatedly.
•
¢ (UP ¢):
Skips to the beginning of the next or
succeeding tracks.
• 4 (DOWN 4): Goes back to the beginning of the
current or previous tracks.
To go to another track directly using the number
buttons
On the remote control ONLY:
Pressing the number button(s) before or
during play allows you to start playing the
track number you want.
Ex.: For track number 5, press 5.
For track number 15, press +10,
then 5.
For track number 20, press +10,
then 10.
For track number 32, press +10, +10, +10, then 2.
To locate a particular point in a track
During play, press and hold ¢ or 4
(or UP ¢ or DOWN 4 on the unit).
• ¢ (UP ¢): Fast-forwards the tracks.
•
4 (DOWN 4): Fast-reverses the tracks.
CD 3/8
Programming the Track Playing Order
—Program Play
You can arrange the order in which tracks play before you
start playing. You can program up to 32 tracks.
On the remote control ONLY:
1
Place a disc.
• If the current source is not the CD player, press
CD 6, then 7 before going to the next step.
2
Press PLAY MODE.
The PRGM (program) indicator appears on the
display.
3
Press
¢ or 4 to select the
track number, then press
PLAY MODE.
You can also use the number button(s)
to select a track number.
• For the operation of the number
buttons, see “To go to another track
directly using the number buttons”
on the left column.
4
Repeat step 3 to program other tracks you
want.
5
Press CD
3/8.
The tracks are played in the order you have
programed.
After programming a 32nd track
“FULL” will appear on the display for a while and the 32nd track
number appears again.
To stop playing, press
7.
Playback stops and the play mode returns to Normal
Play.
To check the program contents
You can check the program contents by pressing
PLAY MODE repeatedly before or after playback.
PRGM
PLAY
MODE
PRGM
Track number Program step number
CD 3/8
1
4
7
10
2
5
8
+10
3
6
9
PLAY
MODE
PLAY
MODE
1
4
7
10
2
5
8
+10
3
6
9
Playing Back Discs
(continued)
12-14_UX-H100[B].p65 04.2.24, 5:56 PM 13