Playing back discs, Playing back the entire disc—normal play – JVC SP-UXH100 User Manual
Page 15
12
2
Place a disc correctly
with its label side up,
then press down on the
portions around the
disc’s center hole until
you hear a click.
3
Close the disc cover gently.
4
Press CD
6.
The unit automatically turns on and the source
changes to the CD player.
After loading the disc, the first track of the disc starts
playing.
• The disc automatically stops when the last track has
finished playing.
To stop playing, press
7.
The total track number and total playing time
appear on the display.
• Total playing time does not appear when MP3 disc is
loaded.
To remove the disc, press
0 OPEN on the unit, then take out
the disc by holding it at the edges while pressing the unit’s
pivot lightly.
• If the disc cannot be read correctly (because it is scratched,
for example) or an unreadable CD-R or CD-RW is inserted
Playback will not start.
• If no disc is inserted
“NO DISC” appears on the display.
DO NOT try to open the disc cover by hand as it
will be damaged.
Playing Back the Entire Disc—Normal Play
1
Press
0 OPEN on the unit.
The disc cover opens.
• You can insert a disc while listening to another source.
Playing Back Discs
Current track number
Elapsed playing
time
CD
3/8
This unit has been designed to play back the following
discs—CD, CD-R, and CD-RW.
You can play back the discs containing the tracks in music
CD format or MP3 files in ISO 9660 format.
• In this instruction, we call a disc recorded MP3 files “MP3
disc,” and “file” is also referred to as “track.”
When playing CD-Rs or CD-RWs
• Before playing CD-Rs or CD-RWs, read their instructions
or cautions carefully.
• User-edited CD-Rs (CD-Recordable) and CD-RWs (CD-
ReWritable) can be played only if they are already
“finalized.”
• This unit supports “multi-session” discs (up to 5 sessions).
• This unit cannot play “packet write” discs.
• Some CD-Rs or CD-RWs may not play on this unit because
of their disc characteristics, damage or stain on them, or if
the player’s lens is dirty.
• CD-RWs may require a longer readout time. This is
because the reflectance of CD-RWs is lower than for
regular discs.
Notes for MP3 files
• The player can only recognize files with “MP3” or “mp3”
as the extensions, which can be in any combination of
upper and lower case.
• This unit recognizes up to 500 MP3 files on a disc.
• It is recommended that you record your material at a 44.1
kHz sampling rate, using the 128 kbps data transfer rate.
• Some MP3 files or discs may not be played back because
of their characteristics or recording conditions.
• MP3 discs requires a longer readout time than normal discs
because of the complexity of the folder/file configuration.
• ID 3 Tag is not available.
• MP3i and MP3 Pro are not available.
General notes
In general, you will have the best performance by keeping
your discs and the mechanism clean.
• Store discs in their cases, and keep them in cabinets or on
shelves.
• Keep the unit’s disc tray closed when not in use.
• Continued use of irregular shape discs (heart-shape,
octagonal, etc.) can damage the unit.
MP
3
MP3 indicator
Elapsed
playing time
When playing MP3 disc
Current track
number
When playing audio CD
Total track
number
Total playing
time
MP
3
Total track number
When stop playing
MP3 disc
When stop playing
audio CD
Continued
12-14_UX-H100[B].p65
04.2.24, 5:56 PM
12