Adjusting picture pos./ size, Helpful hint, Normalisation) – JVC GD-V422PCE User Manual

Page 17: Adjusting screen, Normalise

Adjusting Picture Pos./ Size

Adjusting screen

Press to display the Picture Pos./ Size menu.

Press to adjust Pos./ Size.

Press to exit from adjust mode.

Press to select H-Pos / H-Size / V-Pos /
V-Size / Clock Phase.

During “AV(S Video)” and
“Component” input signal.

During “RGB” and “PC”
input signal.

Normal

Picture Pos./Size

Normalise

H-Pos
H-Size
V-Pos
V-Size

Normal

Picture Pos./Size

Normalise

H-Pos
H-Size
V-Pos
V-Size
Clock Phase

PICTURE

POS. /SIZE

H-Pos

H-Size

V-Pos

V-Size

Flickering and distortion can be eliminated by using the Position Left “ ” or Right “ ” button
to carry out adjustment.

Helpful Hint ( /

Normalise

Normalisation)

While the Picture Pos./ Size display is active, if either the N button on the remote control is pressed at any time or the

(ACTION button) is pressed during “Normalise”, then all adjustment values are returned to the factory settings.

Clock Phase

(RGB/PC in Mode)

When the Position Left “ ” button is pressed.

When the Position Right “ ” button is pressed.

Notes:

(1) Adjustment details are

memorized separately for
different input signal

formats (Adjustments for component
signals are memorized for 525 (480) / 60i
· 60p, 625 (575) / 50i · 50p, 1125 (1080) /
60i · 50i · 24p· 24sF, 1250 (1080) / 50i,
750 (720) / 60p · 50p each, and RGB /
PC signals are memorized for each
frequency.)

(2) If a “Cue” or “Rew” signal from a VCR or

DVD player is received, the picture
position will shift up or down. This picture
position movement cannot be controlled
by the Picture Pos./ Size function.

PLASMA DISPLAY

INPUT

SURROUND

VOL

PICTURE

SOUND

SET UP

ASPECT

PICTURE
POS. /SIZE

OFF TIMER

MULTI

PIP

SWAP

SELECT

MOVE

Note:

Using the size adjustment function to display a picture with the aspect ratio changed from the original for the

purpose of the public display or commercial gain may infringe on copyright laws.