JVC VN-C30U - Manual (Page 7)

7
The setup consists of changing the contents of [Other Settings]. (The same
setup is also available using the Setting tool provided with the standard
controller.)
VN-C30U Settings page [Other Settings]
Items in [Other Settings]
[DHCP] Set this to “Enable” when the DHCP is used.
[IP Address] To change to the IP address assigned to or approved for
the network administrator. (This is can be changed only
when DHCP is not used.)
[Subnet Mask] Similarly to the IP address, to set the value assigned to
or approved for the network administrator
[Default Gateway] To set the IP address of the default gateway
If this is not used, set “0.0.0.0”.
[Host Name] To specify the host name using up to 8 alphanumeric
characters
This should be set when access linkage using a host
name is required in an environment allowing the use of
the DNS (Domain Name System). The host name is
displayed in the title bars of sub-windows including the
control windows.
Do not specify anything when the host name is not used
or unknown.
[MAC Address] A physical address proper to each product.
* This cannot be changed.
03.10.17, 11:19 AM Page 7