JVC VN-C30U - Manual (Page 31)

31
Regarding HTTP Port Change
Function
This version has been equipped with an HTTP Port change function. The
port can be checked/selected using the provided Setup tool, in addition to
via web browser.
If you forget the HTTP Port number and cannot connect using a web browser,
perform the following steps.
[PROCEDURE]
Input the IP address in the Setup tool, and check the “HTTP Port” while
connected to the VN-C30U. Since the current port number is displayed, input
the port number you want to change it to and click the OK button. (When the
port number is changed, the system is automatically rebooted.)
CAUTION
If the connected VN-C30U is below Version 3.0, the HTTP Port cannot
be changed.
03.10.17, 11:21 AM Page 31