English – JVC RX-80PGD User Manual

Page 32

Page 29

English

Using the DVD MULTI Playback Mode

This receiver provides the DVD MULTI playback mode for reproducing the analog discrete output mode of
the DVD player.
Before playing back a DVD, refer also to the manual supplied with the DVD player.

Speaker arrangements for DVD MULTI playback

The following illustrations show how to obtain the optimum sound environment for the DVD MULTI
playback mode. Try to find the speaker direction and location to create the optimum sound field.

Activating the DVD MULTI playback

You can adjust the DVD MULTI playback mode while playing back a DVD using the analog discrete output
mode on the DVD player.
Once you made adjustments, the receiver memorizes the adjustments until you change them. You also need
to set the DVD player to the analog discrete output mode.

Note:
When you select “DVDMULTI” as the source to play, the DAP and surround modes are canceled
temporarily.

On the front panel:

1. Press DVD MULTI so that “DVDMULTI” appears on the display.

The lamp above the button and the DVD lamp (of the source lamps) light up.

2. Select the analog discrete output mode on the DVD player, and start playing a DVD.

Refer to the manual supplied with the DVD player.

If you want to make any adjustment, go to the following steps.

3. Press DAP/SURROUND/DVD MULTI ADJUST so that the Control

% / fi / @ / # buttons

work for adjusting the DVD MULTI playback mode.
The lamp next to the button lights up.

4. Press Control

% / fi until “–CENTER+” appears on the display.