John Lewis JLDWS1202 - Manual (Page 33)

33
Installing the Dishwasher
• The dishwasher must be installed on a firm floor and adjusted to en-
sure that it is stable and level in all directions.
• To overcome irregularities in the
floor and to match the height of
the appliance to that of surround-
ing units, extend the threaded feet
using a screwdriver.
• The drain hose, inlet hose and
mains cable must be laid so that
they are able to move freely within
the plinth area, and so that they
are not kinked or crushed when the
dishwasher is in position.