beautypg.com

Adding dishwasher salt – John Lewis JLDWS1202 User Manual

Page 10

background image

10

Adding Dishwasher Salt

To decalcify the water softener, it must be filled up with dishwasher
salt. Use only special salt suitable for domestic dishwashers.
If you do not use 3 in1 detergent, fill up with dishwasher salt:
– Before using the dishwasher for the first time.
– When the control indicator for dishwasher salt is illuminated on the

control panel.

1. Open the door and remove the low-

er basket.

2. Unscrew the lid on the salt dispens-

er by turning it anti-clockwise.

3. Only when using the dishwasher

for the first time:
Fill the salt dispenser with water.

4. Place the funnel (supplied) over the

dispenser opening.
Fill the dispenser with dishwasher
salt; the capacity of the dispenser is
approx. 1.0-1.5 kg, depending on
the size of the grains. Do not overfill
the dispenser.

3

If water overflows when filling up with dishwasher salt, this is com-
pletely harmless.

5. Clean away any salt remnants from the dispenser opening.
6. Screw the lid back on in a clockwise direction.
7. Run a dishwashing cycle after filling the salt dispenser with dish-

washer salt. This will wash away salt water and salt crystals that have
been spilt.

3

Depending on the size of the salt granules, it can take several hours for
the salt to dissolve in the water and for the control indicator for dish-
washer salt to go out.