Jacuzzi J-ALLURELuxury Bathing and Entertainment System - Manual (Page 19)

J-Allure
TWO STRIPS OF FOAM TAPE SIDE
BY SIDE FROM TOP TO BOTTOM
(ONLY ON RIGHT SIDE WALL)
SIDE
WALL
WALL
EXTRUSION
FIXED
PANEL
FRAME
SEALANT
SIDE WALL
BATH RIM
SEALANT
ALONG ENTIRE
LENGTH OF
SIDE WALL
SEALANT
SIDE
WALL
(GLASS PANELS AND GUIDES
NOT SHOWN FOR CLARITY)
V SEAL
Side Walls Caulking
After the side walls are installed, they must be caulked with silicone sealant (not provided). Seal the entire length at
the bottom and from the bottom to top where the side wall moulding meets the attached extrusion. Also caulk the joint
between the side wall extrusion and the fixed panel frame.
Apply the two foam tapes (provided) to side wall. The first tape will butt up against the curve of the side wall with the
second tape against the first tape. Remove the facing paper from both. Install the V seal as shown so that it covers
the joint between the foam tapes.
17