John Deere 655C-ll User Manual
Page 14
14
Dimensions
655C-II
755C-II
Rounded to the nearest whole number.
A
Height over cab (including grousers) ...................123 in. (3129 mm)
130 in. (3304 mm)
B
Height over exhaust pipe.....................................122 in. (3092 mm)
125 in. (3186 mm)
C
Length to front of track .......................................171 in. (4339 mm)
189 in. (4801 mm)
D
Overall length (with bucket).................................241 in. (6132 mm)
269 in. (6832 mm)
E
Track gauge........................................................66 in. (1680 mm)
71 in. (1800 mm)
F
Ground clearance ................................................15.6 in. (395 mm)
16.8 in. (426 mm)
Standard Bucket with Bolt-on Teeth
Capacity heaped (ISO 7546) ................................2.35 cu. yd. (1.8 m
3
)
3.14 cu. yd. (2.4 m
3
)
Breakout force ....................................................27,675 lb. (12 550 kg)
37,080 lb. (16 820 kg)
Static tipping load ...............................................23,086 lb. (10 470 kg)
30,418 lb. (13 795 kg)
G
Dumping height at 45 degrees ............................111 in. (2827 mm)
121 in. (3085 mm)
H
Reach at 45 degrees ...........................................42 in. (1072 mm)
47 in. (1192 mm)
I
Maximum digging depth below grade .................5.2 in. (132 mm)
5.6 in. (142 mm)
J
Maximum operating height..................................197 in. (5000 mm)
217 in. (5505 mm)
K
Maximum height of hinge pin..............................144 in. (3662 mm)
159 in. (4040 mm)
L
Height of hinge pin, transport position.................20 in. (503 mm)
23 in. (573 mm)
M
Width of bucket...................................................96 in. (2445 mm)
98 in. (2500 mm)
M
J
L
I
K
G
H
C
B
A
E
F
D
15
°
40
°
52
°
50
°
57
°
45
°
655C / 755C SERIES II LOADERS WITH STANDARD BUCKETS