JVC GR-DX106/76AG User Manual

Page 41

USING THE REMOTE CONTROL UNIT

0
9

2
5

VCR
(Recording deck)

IMPORTANT

Although the MBR is compatible with JVC VCRs
and those of many other makers, it may not work
with yours or may offer limited functions.

NOTES:

● If the VCR’s power does not come on in step 1, try

another code from the VCR CODE LIST.

● Some brands of VCR do not come on automatically. In

this case, turn the power on manually and try step 2.

● If the remote control is not able to control the VCR, use

the controls on the VCR.

● When the remote control’s batteries run out, the VCR

brand you have set will be erased.
In that case, replace the old battery with a new one to
reset the VCR brand.

MAKE CONNECTIONS

Also refer to pg. 16 and 42.

A JVC VCR equipped with a remote pause

connector . . .

.... connect the editing extension cable to the

Remote PAUSE connector.

A JVC VCR not equipped with a remote

pause connector but equipped with an
R.A.EDIT connector . . .

.... connect the editing extension cable to the

R.A.EDIT connector.

A VCR other than above . . .

.... connect the editing extension cable to the remote

control’s PAUSE IN connector

Insert a recorded tape into the camcorder. Set the

VIDEO/MEMORY

Switch

to “VIDEO”, then set the

Power Switch

to “

” while pressing down the

Lock Button

located on the switch.

Turn the VCR power on, insert a recordable tape

and engage the AUX mode (refer to the VCR’s
instructions).

NOTES:

Before Random Assemble Editing, make sure the
indications do not appear on the TV monitor. If they do, they
will be recorded onto the new tape.

To choose whether or not the following displays
appear on the connected TV . . .
• Date/Time

.... set “DATE/TIME” to “AUTO”, “ON” or “OFF” in the Menu

Screen (

੬

pg. 34, 36).

Or, press DISPLAY

on the remote control to turn

on/off the date indication.

• Time Code

.... set “TIME CODE” to “ON” or “OFF” in the Menu Screen

(

੬

pg. 35, 36).

• Indications other than date/time and time code

.... set “ON SCREEN” to “LCD”, “LCD/TV” or “OFF” in the

Menu Screen (

੬

pg. 34, 36).

Continued on next page.

Random Assemble Editing [R.A.Edit]

Create edited videos easily using your camcorder as
the source player. You can select up to 8 “cuts” for
automatic editing, in any order you like. R.A.Edit is
more easily performed when the MBR (Multi-Brand
Remote) is set to operate with your brand of VCR (see
VCR CODE LIST), but can also be performed by
operating the VCR manually.

Before operation, make sure the batteries are installed
in the remote control (

੬

pg. 5).

SET REMOTE/VCR CODE

Turn off the power to the VCR and point the remote

towards the VCR’s infrared sensor. Then, referring to
the VCR CODE LIST, press and hold MBR SET

and enter the brand code.
The code is automatically set once you release MBR
SET

, and the VCR’s power comes on.

Make sure the VCR’s power is on. Then, while

holding SHIFT

, press the button on the remote for

the desired function. The functions the remote can
control are PLAY, STOP, PAUSE, FF, REW and VCR
REC STBY (you do not need to press SHIFT

for this

one).

You are now ready to try Random Assemble Editing.

VCR BRAND
NAME

AKAI

BLAUPUNKT

DAEWOO

FERGUSON

GRUNDIG

HITACHI

JVC

A
B
C

LG/
GOLDSTAR

BRAND

CODE

6 2
6 4
7 7
1 3
1 8
9 7
9 8
3 2
1 4
3 4
6 6
6 3
9 1
9 6
9 3
1 1

VCR BRAND
NAME

MITSUBISHI

NEC

PANASONIC

PHILIPS

BRAND

CODE

6 7
6 8
3 7
3 8
1 3
1 7
1 1
9 4
1 8
1 9
9 5
1 1
9 4
9 1
9 6
1 2
3 3
7 2

BRAND

CODE

9 4
3 6
3 5
9 1
9 6
1 5
1 0
6 5
6 0
3 9
3 1
9 1
9 6
9 7
3 2
6 9
6 1

VCR BRAND
NAME

SAMSUNG

SANYO

SELECO,
REX

SHARP

SONY

THOMSON,
TELEFUNKEN,
SABA,
NORDMENDE

TOSHIBA

VCR CODE LIST

01 DX300,95,75AAGHS_EN 35-44

03.3.20, 6:16 PM