JVC TS-C500SPG - Manual (Page 4)

ENGLISH
3
1. Fold the end of each speaker
cord.
Attach to the speakers
2. Press and hold the terminal
clamp.
3. Insert the speaker cord, and
release the finger from the
terminal clamp.
• Connect the cord with black stripes to the · (black) terminal and the other cord to the ª (red) terminal.
• Be careful that connection of the speaker cords to incorrect polarity terminals ( ª and ·) degrades stereo
feeling and sound qualities.
When you connect the supplied speaker cord to the terminal clamp of the speakers, fold the end of each speaker
cord to avoid short-circuit.
Attach to the display
• Connect the cord with black stripes to the · (black) terminal and the other cord to the ª (red) terminal.
• Be careful that connection of the speaker cords to incorrect polarity terminals ( ª and ·) degrades stereo
feeling and sound qualities.
• Attach the ferrite core supplied with your display to the speaker cord.
For details, refer to the instruction manual of your display.
1. Open the terminal clamp. 2. Insert the speaker cord. 3. Close the terminal clamp.
Connecting the speaker cord
Cord clamp
Bundling the speaker cords
You can bundle the speaker cords neatly with the supplied cord clamp, as illustrated.
• Stick the cord clamp firmly after removing its protective seal.
• When sticking the cord clamp on the display:
— Make sure not to block the ventilation hole.
— Make sure not to prevent attachment of the options, such as a Wall Mounting Unit or
a Ceiling Suspension Unit.
Speaker cord