JVC DR-M7S - Manual (Page 95)

Masterpage:Right-No-Heading
EN
95
Filename [DR-M7SE_11Subsidiary.fm]
Page 95 March 26, 2004 4:25 pm
S
HOW
V
IEW
®
System Setup
Guide Program Number Set
A
Access the Main Menu screen.
Press SET UP.
B
Access the “SAT/GUIDE PR” screen.
C
Enter the Guide Program number.
A Press rt to select “GUIDE PROGRAMME”, then
press ENTER.
B Press rt to select the Guide Program number for the
desired station as shown in the TV listings. Then press
ENTER.
● To change the Guide Program number in 10 increments, press
and hold rt.
D
Enter the receiving channel position number.
A Press rt to select “TV PROGRAMME”, then press
ENTER.
B Press rt to select the number of the unit’s channel
position on which the Guide Program number’s
broadcast is received by the unit or the satellite
receiver. Then press ENTER.
● Pressing AUX changes “TV PROGRAMME” to “SAT”.
● To timer-record a satellite programme with the S
HOW V IEW
system, you need to install an optional Satellite Controller and
perform the procedure described in “Satellite Receiver Control
Setting” (
੬
pg. 26).
● Repeat steps C and D as necessary.
E
Complete the setting.
Press SET UP.
IMPORTANT:
Normally, Auto Set Up (
੬
pg. 19), Preset Download (
੬
pg. 21) or Auto Channel Set (
੬
pg. 96) sets the Guide Program numbers
automatically. You need to set the Guide Program numbers manually only in the following cases.
● When timer-programming with the S
HOW V IEW system, the channel position, where the station you wish to record is received on
your unit, is not selected,
OR
when you add a channel after Auto Set Up, Preset Download or Auto Channel Set has taken place,
—Set the Guide Program number for that station manually.
● When you wish to timer-record a satellite programme with the S
HOW V IEW system,
—Set the Guide Program numbers for all satellite broadcasts received on your satellite receiver.
● Turn on the unit.
● Turn on the TV and select the AV mode.
● Slide the TV/CABLE/SAT/DVD switch to DVD.
A Press w e to select
“INITIAL SET UP”, then
press ENTER.
B Press w e to select “SAT/
GUIDE PR”, then press
ENTER.
Guide Program Number
“Guide Program (GUIDE PROGRAMME) number” refers to
the assigned TV station numbers, according to broadcast
area, for the S
HOW V IEW timer recording. The Guide Program
numbers can be found in most TV listings.
DR-M7SE_01.book Page 95 Friday, March 26, 2004 4:27 PM