Editing, Edit from a camcorder, Pg. 78 – JVC DR-M7S User Manual
Page 78: Make connections, Set the unit’s input mode, Set the recording speed, Prepare the camcorder for dubbing, Start dubbing, Stop dubbing
![background image](/manuals/131285/78/background.png)
Filename [DR-M7SE_10Editing.fm]
Masterpage:Left0
78
EN
Page 78
March 26, 2004 3:52 pm
EDITING
Edit From A
Camcorder
You can use a camcorder as the source player and your
unit as the recording deck.
A
Make connections.
A If the camcorder has no S-VIDEO output connector:
— connect the camcorder’s AUDIO OUT and VIDEO
OUT connectors to the unit’s AUDIO and VIDEO
input connectors on the front panel.
B If the camcorder has an S-VIDEO output connector:
— connect the camcorder’s AUDIO OUT and
S-VIDEO OUT connectors to the unit’s AUDIO and
S-VIDEO input connectors on the front panel.
● When using a monaural camcorder, connect its AUDIO OUT
connector to the AUDIO L input connector on your unit.
B
Set the unit’s input mode.
Press PR +/– to set the channel to “F-1”.
● Set “F-1 INPUT” to “VIDEO” for the VIDEO input connector,
or “S-VIDEO” for the S-VIDEO input connector, depending on
the connector being used. (
C
Set the recording speed.
Press REC MODE repeatedly until the desired recording
speed appears.
D
Prepare the camcorder for dubbing.
Start playback on the camcorder slightly before the actual
point from where you wish to start dubbing.
E
Start dubbing.
Press and hold 7, then press 4 on the remote control, or
press 7 on the unit.
F
Stop dubbing.
Press 8 on the unit, then stop playback on the
camcorder.
NOTES:
● All necessary cables can be obtained from your dealer.
● Refer to the camcorder’s instruction manual for operating
procedure.
● The quality of dubbed picture becomes poorer than that of the
original.
1 STANDBY/ON
F1
S-VIDEO
VIDEO
L(MONO)-AUDIO-R
REC MODE
1 STANDBY/ON
F1
S-VIDEO
VIDEO
L(MONO)-AUDIO-R
REC MODE
A
If the camcorder has no S-VIDEO output connector:
B
If the camcorder has an S-VIDEO output connector:
Recorder
AUDIO OUT
VIDEO OUT
Camcorder
AUDIO input
Player
VIDEO input
Video cable (not provided)
Recorder
Audio cable (not provided)
S-VIDEO OUT
AUDIO OUT
Camcorder
S-VIDEO input
Player
AUDIO input
S-Video cable (not provided)
Audio cable (not provided)
Slide the TV/CABLE/SAT/DVD switch to DVD.
DR-M7SE_01.book Page 78 Friday, March 26, 2004 4:27 PM